Friday, December 28, 2012

Download Realtek HD Audio Codec Sound Driver

Realtek HD Audio Codec
- File name : 32bit_Vista_Win7_Win8_R270.exe
- File Size : 50520 kb
- Version : R2.70
- Release Date : 2012/6/22

Compatibility and System Requirements :

- Windows 8
- Windows 7

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver : Download Realtek HD Audio Codec Sound Driver
Source direct link

Download Realtek HD Audio Codec Sound Driver

Realtek HD Audio Codec
- File name : 32bit_Vista_Win7_Win8_R270.exe
- File Size : 50520 kb
- Version : R2.70
- Release Date : 2012/6/22

Compatibility and System Requirements :

- Windows 8
- Windows 7

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver : Download Realtek HD Audio Codec Sound Driver
Source direct link

Download Intel USB 3.0 Driver

Intel USB 3.0 Driver
- File name : USB3.0_Win7_1.0.6.245_PV.exe
- File Size : 4.96 MB
- Version : 1.0.6.245
- Release Date : 11/07/2012

Compatibility and System Requirements :

- Windows 8
- Windows 8 (x64)
- Windows 7
- Windows 7 (x64)
- Windows Vista
- Windows Vista (x64)
- Windows XP

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver :  Download Intel USB 3.0 Driver
Source direct link

Download Intel USB 3.0 Driver

Intel USB 3.0 Driver
- File name : USB3.0_Win7_1.0.6.245_PV.exe
- File Size : 4.96 MB
- Version : 1.0.6.245
- Release Date : 11/07/2012

Compatibility and System Requirements :

- Windows 8
- Windows 8 (x64)
- Windows 7
- Windows 7 (x64)
- Windows Vista
- Windows Vista (x64)
- Windows XP

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver :  Download Intel USB 3.0 Driver
Source direct link

Thursday, December 27, 2012

Download Intel® HD Graphics Driver for Windows 32/64 Bit

Intel HD Graphics
for Windows 32 Bit
- File name : GFX_Win7_8_32_9.17.10.2875.exe
- File Size : 109.39 MB
- Version : 9.17.10.2875
- Release Date : 11/06/2012

for Windows 64 Bit
- File name : GFX_Win7_8_64_9.17.10.2875.exe
- File Size : 137.63 MB
- Version : 9.17.10.2875
- Release Date : 11/06/2012

Compatibility and System Requirements :

- Windows 8
- Windows 8 (x64)
- Windows 7
- Windows 7 (x64)

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver : Download Intel® HD Graphics Driver for Windows 32/64 Bit
Source | for Windows 32 bit
Source | for Windows 64 bit

Download Intel® HD Graphics Driver for Windows 32/64 Bit

Intel HD Graphics
for Windows 32 Bit
- File name : GFX_Win7_8_32_9.17.10.2875.exe
- File Size : 109.39 MB
- Version : 9.17.10.2875
- Release Date : 11/06/2012

for Windows 64 Bit
- File name : GFX_Win7_8_64_9.17.10.2875.exe
- File Size : 137.63 MB
- Version : 9.17.10.2875
- Release Date : 11/06/2012

Compatibility and System Requirements :

- Windows 8
- Windows 8 (x64)
- Windows 7
- Windows 7 (x64)

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver : Download Intel® HD Graphics Driver for Windows 32/64 Bit
Source | for Windows 32 bit
Source | for Windows 64 bit

Download AHCI SATA Driver Intel® for Windows

ACHI SATA Driver
- File name : STOR_Win7_8_11.7.0.1013_PV.exe
- File Size : 11.81 MB
- Version : 11.7.0.1013
- Release Date : 12/06/2012

Compatibility and System Requirements :

- Windows 8
- Windows 8 (x64)
- Windows 7
- Windows 7 (x64)
- Windows Vista
- Windows Vista (x64)
- Windows XP

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver : Download AHCI SATA Driver Intel® for Windows
Source direct link

Download AHCI SATA Driver Intel® for Windows

ACHI SATA Driver
- File name : STOR_Win7_8_11.7.0.1013_PV.exe
- File Size : 11.81 MB
- Version : 11.7.0.1013
- Release Date : 12/06/2012

Compatibility and System Requirements :

- Windows 8
- Windows 8 (x64)
- Windows 7
- Windows 7 (x64)
- Windows Vista
- Windows Vista (x64)
- Windows XP

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver : Download AHCI SATA Driver Intel® for Windows
Source direct link

Download Chipset Intel® Driver Device Software Latest

Chipset Intel (Just Ilustration)
- File name : INF_allOS_9.3.0.1026_PV.exe
- File Size : 4.29 MB
- Version : 9.3.0.1026
- Release Date : 11/16/2012

Compatibility and System Requirements :

- Windows 8
- Windows 8 (x64)
- Windows 7
- Windows 7 (x64)
- Windows Vista
- Windows Vista (x64)
- Windows XP

Support Product :

Intel® Desktop Board DB75EN
Intel® Desktop Board DH77DF
Intel® Desktop Board DH77EB
Intel® Desktop Board DH77KC
Intel® Desktop Board DQ77CP
Intel® Desktop Board DQ77KB
Intel® Desktop Board DQ77MK
Intel® Desktop Board DZ75ML-45K
Intel® Desktop Board DZ77BH-55K
Intel® Desktop Board DZ77GA-70K
Intel® Desktop Board DZ77RE-75K
Intel® Desktop Board DZ77SL-50K
Next Unit of Computing Board D33217CK
Next Unit of Computing Board D33217GKE
Next Unit of Computing Board DCP847SKE
Next Unit of Computing Kit DC3217BY
Next Unit of Computing Kit DC3217IYE
Next Unit of Computing Kit DCCP847DYE

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver :  Download Chipset Intel® Driver Device Software Latest
Source direct link

Download Chipset Intel® Driver Device Software Latest

Chipset Intel (Just Ilustration)
- File name : INF_allOS_9.3.0.1026_PV.exe
- File Size : 4.29 MB
- Version : 9.3.0.1026
- Release Date : 11/16/2012

Compatibility and System Requirements :

- Windows 8
- Windows 8 (x64)
- Windows 7
- Windows 7 (x64)
- Windows Vista
- Windows Vista (x64)
- Windows XP

Support Product :

Intel® Desktop Board DB75EN
Intel® Desktop Board DH77DF
Intel® Desktop Board DH77EB
Intel® Desktop Board DH77KC
Intel® Desktop Board DQ77CP
Intel® Desktop Board DQ77KB
Intel® Desktop Board DQ77MK
Intel® Desktop Board DZ75ML-45K
Intel® Desktop Board DZ77BH-55K
Intel® Desktop Board DZ77GA-70K
Intel® Desktop Board DZ77RE-75K
Intel® Desktop Board DZ77SL-50K
Next Unit of Computing Board D33217CK
Next Unit of Computing Board D33217GKE
Next Unit of Computing Board DCP847SKE
Next Unit of Computing Kit DC3217BY
Next Unit of Computing Kit DC3217IYE
Next Unit of Computing Kit DCCP847DYE

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver :  Download Chipset Intel® Driver Device Software Latest
Source direct link

Wednesday, December 26, 2012

Download Canon LBP6200d Printer Driver

Canon LBP6200d
- File name : LBP6200d_R151_V110_W32_uk_EN.exe
- File Size : 11,503KB
- Version : R1.51V1.10
- Release Date : 12-Nov-2012

Compatibility and System Requirements :

- Windows 8
- Windows 8 (x64)
- Windows 7
- Windows 7 (x64)
- Windows Vista
- Windows Vista (x64)
- Windows XP

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver : Download Canon LBP6200d Printer Driver
Source direct link

Download Canon LBP6200d Printer Driver

Canon LBP6200d
- File name : LBP6200d_R151_V110_W32_uk_EN.exe
- File Size : 11,503KB
- Version : R1.51V1.10
- Release Date : 12-Nov-2012

Compatibility and System Requirements :

- Windows 8
- Windows 8 (x64)
- Windows 7
- Windows 7 (x64)
- Windows Vista
- Windows Vista (x64)
- Windows XP

How to Install the Driver :
Click show for details
Downloading drivers:

Almost all drivers you download are going to be a single file if the file is not an executable file it is almost definitely a compressed file that contains all the driver files. In order to install the driver you will first need to uncompress the file.
When extracting or uncompressing the drivers make sure to remember where you place the folder containing the drivers as you will need to point Windows to this folder when installing the drivers. We usually recommend users install the driver files in a folder on their desktop as it's an easy place to remember and locate.
Finally, the single file or the files extracted from the compressed file can be deleted after you have finished installing the drivers.

Executable

Many computer and hardware manufacturers today are pre-packaging their drivers into executable files or have the drivers installed through the setup file, which means double-clicking the setup file or the file you download should install the drivers to the computer for you.
Note: Many developers may package their drivers in a compressed file, which means before looking for the setup file you may need to uncompress the downloaded file. Information about doing this was explained above. If after uncompressing the file it still does not contain an executable file, setup file, or does not install your hardware device continue with the below recommendations.
Finally, if you were successful in installing your drivers make sure to reboot the computer after the drivers have been installed.

Using the have disk option
Often computer manufacturers and hardware manufacturers will also place the drivers on the CD, diskette, or download for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a devices driver for this setup.

Installing a new device
  1. Open Windows Device Manager.
  2. In the Device Manager make sure the device you're attempting to install is not already listed from past install attempts. If the device is found highlight it and remove it from Device Manager to prevent any conflicts during the install.
  3. Once Device Manager looks ok reboot the computer.
  4. As the computer is rebooting an install new hardware wizard should appear if Windows detects the new hardware using this wizard you should be able to point Windows to the folder containing your drivers either on the CD, diskette, or the folder containing the files you downloaded.
If Windows does not detect any new hardware open Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps you will have an option to tell Windows you have a disk containing the drivers for your new hardware device, at this point Windows to the directory containing the drivers for your device.

Once drivers have been installed reboot.

Upgrading drivers for pre-existing device
  1. Open Windows Device Manager.
  2. In the Device Manager locate the device you wish to update the drivers for.
  3. Right-click the device and click Properties.
  4. In the Properties window click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard point Windows to the location of the updated drivers on your hard drive
Once drivers have been installed reboot.

Install through the .inf file

Finally, if the above recommendations do not work the installation instructions for drivers and hardware devices are always contained in a .inf file that is located within the drivers.
Locate the .inf for your version of Windows, right-click that file and choose the option for install. Note this is a very raw form of installing a drivers and it is important that you make sure you're installing the correct .inf file and not a .inf file for another device or for a different version of Windows. Additional information and tips about locating the drivers was explained earlier in the general driver tips section.
Once you have right-clicked and installed the driver, reboot the computer.
One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you're still having difficulties getting the device to install it's possible you're not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.
Link Download Driver : Download Canon LBP6200d Printer Driver
Source direct link